UFESA FLEXY-HEAT CIE, Instruction Manual

Page: 17 / 58

17
of wear or damage. If there are any signs or if
the appliance has been used improperly or is not
working, contact an authorized service centre or to
reconnect it.
If the cord is damaged, do not use the product. The
product must be taken to an authorized service
centre for repair, otherwise, the product will have
to be discarded.
Do not use the product if it is wet or damp. Never
immerse the remote control in water. Dry the
product prior to use if it shows any signs of
moisture.
This device is designed for use at a maximum
altitude up to 2000m above sea level.
IMPORTANT WARNINGS
The mains connection cable must not be tangled or wrapped around the product during
use.
Do not pull on the cable to unplug it or use it to carry the product. Do not wrap the cable
around the control.
Do not cover or lay the control on top of the product during use in order to ensure its proper
operation.
Use without folding.
Do not stick any pins or needles or any other pointy metal objects into the product.
Proceed according to the conservation section of this manual for cleaning.
Do not use the product to warm up animals.
The electric blanket should not be tucked under the mattress. The product you purchased
is intended to be used underneath the user in the bed.
We do not recommend using the electric blanket in stowaway or fold-up beds.
The electric blanket should also not be used on inflatable beds, due to the risk of its
deterioration from the effect of the heat.
This product should not be used on water beds.
Prolonged use of the product at elevated temperatures may cause skin injury; despite