UFESA FF0350, Instruction Manual

Page: 13 / 40

13
ASSEMBLY
Warning: the fan may be used only if it is fully and properly assembled, that is to say, complete with
the base and the grille.
Warning: always disconnect the appliance from the mains supply before assembling. if in doubt, have
the operation checked or carried out by a qualified technician.
ASSEMBLY FF1450 MODEL
1. Place it on the round base face down and attach it with the plate to fix the base, place the washer and
screw it together with the adjustable rod so that the base and rod are fixed (7).
2. Take the main body of the fan, place it on the fan bracket (9) and fix it in place with the screws so
that it is firmly attached and then secure the adjustable “T” shaped rod with the screws.
USE
Before each use check that the appliance is in good condition and that the electric cable is not
damaged; if the electric cable is damaged, it must be replaced by the manufacturer or by the technical
assistance service or, in the event, by a qualified technician, in order to avoid any type of danger.
Insert the plug into the mains socket.
Ventilation: Select the required speed by pressing the speed selector using the following positions:
1 - Minimum speed 2 - Medium speed 3 - Maximum speed
To turn the fan off, turn the selector to the “0” position and then remove the plug from the mains
socket.
Vertical inclination (high-low): this is adjusted by holding the motor body and tilting it in the desired
direction.
During long periods of inactivity, disconnect the plug from the mains socket.
CLEANING AND MAINTENANCE
Warning: before carrying out the normal cleaning operations, remove the plug from the mains socket.
• To clean the appliance, use a soft, slightly damp cloth; do not use abrasive or corrosive products.
• Do not immerse any part of the fan in water or any other liquid: if this happens, do not immerse your
hand in the liquid and, first of all, remove the plug from the mains socket. Carefully dry the device and
check that all the electrical parts are dry as well: if in doubt, contact a qualified technician.
• It is essential to keep the ventilation holes of the motor free of dust and fluff.
• In case of long periods of non-use store the fan, protecting it from dust and moisture; we recommend
using the original packaging.
• If you decide to stop using the appliance, it is advisable to render it inoperational by cutting the power
cable (first ensuring that the plug has been disconnected from the mains socket) and making sure that
parts which could be dangerous to children (e.g. the blade) may cause no harm.