UFESA Bellagio Bianca, Instruction Manual

Page: 20 / 56

20
6) Indicator light starts blinking white while machine is heating up for approximately 50
seconds. Afterwards indicator lights steady white the machine is ready to be used. Use the
volume selector to set the volume display in accordance with the number of bars shown
on capsule or select amount of bars to your own taste. Pressing the brewing button, beve-
rage preparation starts. Wait to stops. Extraction can be stopped at any time manually by
pressing the brewing button.
7) When the machine stops brewing, open the locking handle. Pull out the capsule holder
and remove used capsule. Dispose the capsule properly.
8) Rinse both sides of the capsule holder with water and dry. Inset capsule holder into
machine. Enjoy your beverage.
DESCALING
1. Remove and empty the water tank.
2. Refill the tank with a descaling solution and water as specified on the package of the
descaling product. Refit the tank.
3. Power the machine On and place a suitable container under the spout.
4. Press brewing buttons and then supply two cups (aprox 150ml each) of water.
5. Allow the descaling solution to work for about 15-20 minutes.
6. Switch on the machine pressing brewing buttons, then proceed as described in steps.
7. Repeat the steps described in point until the water tank is completely empty.