UFESA Aqua Steam, Instruction Manual

Page: 20 / 56

20
The iron leaves
bright spots
on clothing or
imprint
The ironing surface is une-
ven, for example, because
you are ironing where the
clothes are stitched or
folded
Bright spots or imprints will not persist; they
will disappear after the clothes are washed.
Avoid ironing seams or folds, or you can put
a cotton cloth on the ironing area to avoid
imprints
Insufficient felt in the iro-
ning board cover
Add a layer of felt pad under the ironing board
cover
The ironing board
cover gets wet or
water droplets
appear on the
floor/clothing
After a long ironing opera-
tion, steam will condense
on the ironing board cover
If the foam or felt pad is damaged, replace the
ironing board cover. You can also add a layer
of felt pad under the ironing board cover to
prevent condensation on the ironing board
The ironing board is not sui-
table for the strong steam
of the product
Add a layer of felt pad under the ironing board
cover to prevent condensation on the ironing
board
PRODUCT DISPOSAL
This product complies with European Directive 2012/19/EU on electrical and
electronic devices, known as WEEE (Waste Electrical and Electronic Equip-
ment), provides the legal framework applicable in the European Union for the
disposal and reuse of waste electronic and electrical devices. Do not dispose
of this product in the bin, instead going to the electrical and electronic waste
collection center closest to your home.