●
Slowly push the turbobrush back and forth.
Do not hold the working turbobrush for
a longer time in one place, but constantly
move it, so as not to damage the carpet
(fitted carpet).
While cleaning carpet fringes always
move the turbobrush in the direction
indicated by the arrow (Fig.
L
). It prevents
getting the fringes into the rotating brush.
The speed of the brush roller rotation
depends on the amount of dust in the
dust bag and cleanliness of filters. The
roller may stop rotating on the carpet. Then the
dust bag and filters should be replaced.
Maintenance and cleaning of the
turbobrush
Before cleaning and maintenance of the
turbobrush it must be disassembled
from the vacuum cleaner.
CLEANING OF THE ROTATING BRUSH
During operation the brush collects
pieces of: threads, strings, hair, rags, etc.
They reduce cleaning efficiency.
To remove dirt from the rotating brush follow the steps
below:
1
Place tips of scissors into the slot of the rotating brush.
2
Move the scissors so as to catch the threads and
hair tangled on the brush.
3
Cut them and take out manually or using small
tongs. Be careful not to damage the bristle of the
rotating brush.
Dirt such as matches, pieces of paper or
clothing may obstruct the suction duct
of the turbobrush, leading to significant
reduction of the suction power and reduced speed
or brush roller rotation (until it completely stops).
M
CLEANING OF THE SUCTION DUCT OF
THE TURBOBRUSH
To remove dirt from the suction duct of the turbobrush
follow the steps below:
1
Turn the turbobrush with wheels upward.
2
Press the fastening in the turbine cover and take
the cover out from the turbobrush.
3
Remove dirt from the suction duct, turbine blades
and turbine chamber.
4
Place the turbine cover so that its two ledges match
the holes in the turbobrush body, press the cover until
the it latches on the body. Characteristic clicking sound
indicates the correct assembly of the turbine cover.
Cleaning the turbobrush
Never clean the turbobrush with gasoline,
solvents, oils and other chemicals that
may cause discoloring of the housing.
Do not use granular cleaning agents that
may scratch the housing.
●
The turbobrush may be cleaned with damp cloth
(possibly moisten with a washing-up liquid).
Store the turbobrush away from hot
ovens, radiators, heaters, etc. High
temperature may lead to permanent
deformation of the turbobrush housing.
Advice on disposal
Our goods come in optimised packaging. This
basically consists in using non-contaminating
materials which should be handed over to the local
waste disposal service as secondary raw materials.
This product complies with EU Directive
2002/96/EC. The crossed wheelie bin
symbol shown on the appliance indicates that
when it comes to dispose of the product it
must not be included in with household refuse. It must
be taken to a special refuse collection point for electric
and electronic appliances or returned to the distributor
when purchasing a similar appliance. Under current
refuse disposal regulations, users who fail to take
discarded appliances to special refuse collection points
N
