ENGLISH
DESCRIPTION OF THE APPLIANCE
1. Floor brush
2. Brush for wooden floors
3. Beater brush (carpets)
4. Telescopic tube
5. Suction control
6. Hose
7. Suction hole
8. ON/OFF button / Suction control
9. Air outlet grille
10. Air outlet filters
11. Dust container release clip
12. Automatic cable rewind pedal / Carry
handle
13. Container full indicator
14. Aromatherapy scent container
15. Crevice nozzle
16. Upholstery nozzle
17. Furniture nozzle
Cycle-Tech unit
18. Container
19. Lid
20. Carrying handle
21. Permanent HEPA filter.
22. HEPA filter guard
23. HEPA filter detector
24. Container release button
25. Emptying cover
Accessories:
26. Bag for aromatherapy scent
IMPORTANT ADVICE
• Read
these
instructions
carefully.
Safeguard them for future reference.
• Before plugging the appliance into the
mains supply, make sure that the voltage
corresponds to that stated on the charac-
teristics plate.
• This appliance has been designed for
domestic use only. It must only be used
in accordance with these instructions. The
manufacturer will not be held responsible
for any damage caused by improper or mi-
suse of the appliance
• Do not use the vacuum cleaner on people
or animals.
• Never vacuum up hot or glowing subs-
tances, sharp objects, wet or liquid subs-
tances, or inflammable or explosive pro-
ducts.
• Do not let children handle the applian-
ce.
• This vacuum cleaner must not be used
without the Cycle Tech unit and the per-
manent HEPA filter. This could damage the
appliance.
• The appliance must be switched off be-
fore plugging it in or unplugging it.
• Do not operate the appliance with the
cable still coiled.
• Do not unplug the appliance by tugging
on the cable.
• Unplug the vacuum cleaner from the
mains supply when not in use and before
proceeding to clean it or when changing
the filters.
• Do not expose the vacuum cleaner to
outdoor weather conditions, dampness or
heat. Do not leave the vacuum beside hot
ovens, heaters or radiators.
• Do not use the vacuum cleaner if any of
its openings are obstructed, as this will
reduce the air flow causing it to overheat,
which may damage the appliance.
• Do not handle either the vacuum or the
plug with wet hands. Do not immerse the
appliance in water.
• Do not pull on either the cable or the suc-
tion tube to move the vacuum cleaner. Use
the carry handle.
• Do not use the appliance if either the ca-
ble or plug are damaged.
• Make sure not to pinch the cable when
closing doors.
• Always unplug the vacuum cleaner after
use and especially when cleaning it, chan-
ging the filter or emptying out the dust con-
tainer.
• Do not switch the appliance on if the
cable or plug are damaged or if it can be
detected that the appliance is not working
correctly.
• Cable repairs and replacements must be
carried out exclusively by an Authorised
Technical Service Centre.
SUCTION SYSTEM
This appliance operates without a dust bag
using “Cycle-Tech” technology. To do this
just attach the unit.
SWITCHING ON
- Insert the hose into the suction hole so
that it clicks into position.
Pressing down the release button will help
you to insert or remove the hose (6), figure
1.
- Attach the telescopic tube (4) to the suc-
tion hose (6), figure 2, and adjust the length
to suit the user.
- Fit the brush, or whichever accessory is
required, to the vacuum tube, figure 3
- Pull the cable out and plug it into the
mains supply.
- Press the On/Off button (8), figure 4
AC6020.indd 8
6/7/06 17:42:03
