Problems that may occur when
operating the vacuum
You are recommended to replace the bag, if you notice
that:
a) the red field is covering the bag filling indicator,
b) your vacuum cleaner is vacuuming less effectively,
c) bag is full.
The number of the new SAFBAG dust bags that should
be bought is provided on the stick placed on the vacuum’s
compartment.
End of operation, cleaning and
maintenance
1
Switch the vacuum off by pressing ON/OFF
button
(4)
.
2
Remove the plug from the power outlet.
3
Wind the cord by pressing cord rewind button
(7)
.
While doing it, remember to hold the cord to make sure
it does not get tangled and the plug does not hit the
vacuum’s hosing.
4
Disconnect the suction tube and the nozzle or the
brush.
5
Disconnect the telescoping suction tube from the
hose. In order to remove telescopic tube from the hose
handle, press latch
“A”
and pull the tube towards the arrow.
6
Turn the suction tube ending counterclockwise and
remove it from the inlet opening.
7
Your vacuum cleaner may be stored in horizontal
or vertical position. The hose may stay fastened to the
vacuum cleaner, but make sure that it is not bent too
hard when stored.
Horizontal storing:
–
insert the fastening hook of the suction brush into
the clip fastening the suction brush which is located
on the side of the vacuum.
Vertical storing:
–
insert the suction brush fastening hook into the clip
fastening the suction brush which is located at the
bottom of the vacuum right next to to the back wheel.
8
If necessary, the vacuum’s housing and compartment
may be wiped with a wet cloth (it may be moistened with
a detergent), dried or wiped until dry.
Do not use scouring agents or solvents.
F
PROBLEM
WHAT TO DO
You can hear the
“whirring” sound
indicating that the
safety valve has
been triggered.
●
Dust bag cannot be full –
replace the bag with a new
one.
●
Although the bag is not full
yet, replace it with a new one.
Under unfavorable conditions,
fine dust may clog the pores
on the bag’s surface.
●
Suction tube, hose or nozzle
is blocked – remove the clog.
The bag has been
damaged.
Replace bag and filters.
Your vacuum
cleaner is not
working efficiently
enough.
Replace bag and filters, check
the suction tube, hose and
nozzle – remove the clog.
Power installation
fuse went on.
Check whether there are other
electric appliances plugged
into the same electric circuit,
if the fuse turns on repeatedly,
take the vacuum cleaner to
the service.
Your vacuum
cleaner fails to
work, the housing
is damaged or
the power cord is
damaged.
Take your vacuum cleaner to
the service.
Advice on disposal
Our goods come in optimised packaging. This
basically consists in using non-contaminating
materials which should be handed over to the local
waste disposal service as secondary raw materials.
This product complies with EU Directive
2002/96/EC. The crossed wheelie bin
symbol shown on the appliance indicates that
when it comes to dispose of the product it
must not be included in with household refuse. It must
be taken to a special refuse collection point for electric
