Instructions for Use
Preparing the appliance
Installing the air expulsion tuben
Fit the air expulsion tube onto the fixture
with the “push” tab and thread it anti-
clockwise, Fig. 6.
If easier, the housing can also be
removed from the appliance by pressing
the “Push” tab and sliding it out, Fig. 7.
Fig. 6
Housing for the air
expulsion assembly
Fig. 7
Once out, thread the expulsion tube as
shown on Fig. 8, making sure that it is
properly secured.
Fig. 8
Navigation
54
Then fit the assembly onto the appliance
by slotting it into position Fig. 9.
Securing the diffusion duct onto the
air expulsion tube
Fit the diffusion duct onto the free end of
the tube pushing both parts gently until the
duct clicks into place. Make sure that the
clips are closed. Otherwise, the duct may
fall off. Fig 10.
Fig. 9
"+" and "–" keys
The "
+
" and "
–
" keys are used to move to
the right and to the left within the selection
box. If the function selected is
temperature, these keys are used to
increase and reduce the desired
temperature as shown below:
