- 10 -
Lights
3. Bulb is commercially available.
Adjusting lighting
When the bicycle rack (1) is delivered, the tail lights (9) are in the
transport position.
Before using the bicycle rack (1), the tail lights (9) need to be
attached in the correct position.
1. Undo the knurled wheel (26) and push the tail lights (9) into the
outer position.
2. Tighten the knurled wheel (26) again and check that the tail
lights (9) are firmly fastened.
Folding out / collapsing the bicycle rack
Folding out the bicycle rack
1. Open the quick release clamp (6) to approx a 90° position.
2. Fold up the rack frame (7) and fully close the quick release
clamp (6) so that the rack frame (7) is fixed.
3. Press the holder (13) down. Insert the number plate in the
number plate holder (12), push upwards and insert fully.
4. Release holder (13) and check the number plate sits securely.
Description
Replacement
item no.
Indicators
BL HY21W 12V yellow
see no. 32,
Page 15
E1640
Number plate light
3
BL C5W 12V (35 mm long)
white
see no. 33,
Page 15
--
Rear fog-light
3
in
left tail light
BL PR21W 12V red
see no. 34,
Page 15
--
Reversing light
3
for
right tail light
BL PR21W 12V white
see no. 34,
Page 15
--
brake / tail light
3
BL P21/5W 12V white
see no. 35,
Page 15
--
9
9
26
1
M+P-25A-0145
Attention
The registration number on the bicycle rack must match the
registration number of the vehicle and be clearly legible.
Note
To insert taller number plates, press the stoppers (14) back and
push the number plate fully into the number plate holder (12).
The drilling points (15) must be used for fixing smaller number
plates.
7
6
6
90°
6
M+P-25A-0135
14
15
12
13
M+P-25A-0136
