English
English
EN-52
EN-53
Operating the device
Operating the device
C
C
The device stores the measured values in two memories (one
per user). Each memory can store up to 120 readings and the
average value (A). The average value is calculated from the last
three measurements taken.
The measured results are automatically saved in the memory. If
more than 120 measured values are saved, the oldest measured
value (no. 120) is deleted so that the latest value (no. 1) can be
recorded.
To retrieve data, press the Memory button of
the user you wish to retrieve the data for while
the device is switched off. The average value is
displayed with “A“ (Figure 1).
Set the user whose data you wish to retrieve.
Press the Memory button again to display the most recently
measured values (Figure 2). If the date/time function is activated,
the memory number (Figure 2), the date (Figure 3) and the time
(Figure 4) are displayed alternately.
The symbol is stored with the respective measurement.
be viewed as critical and repeated under more favourable
conditions.
Data retrieval
Movements during the measurement may result
in incorrect measurement readings. The motion
control registers stronger movements and these
are indicated by the symbol in the display. If
this symbol appears, please rpeat the measure-
ment and avoid moving.
15. Using the memory
14. Motion control
Figure 1
Figure 2
Figure 3
Figure 4
Press the Memory button repeatedly to recall further measured
values.
You can switch between the two memories by pressing Memory
button 1 or 2.
The stored data remain visible in the display for around 30 sec-
onds. The device then switches itself off.
To delete individual measured values, recall the
measured value you wish to delete.
Press the Memory button again and hold down
until the display firstly flashes and is then re-
placed with dashes.
To delete the entire memory, retrieve the
respective average value (A), press the Memory
button again and hold down until the average
value firstly flashes and is then replaced with
dashes.
Deleting data
Summary of Contents for VISOMAT COMFORT 2-
Page 66: ......
