EN-68
english
Technical information
E
EN-69
english
Technical information
E
Failure
encountered
Possible cause
Corrective action
Irregular heartbeat, dis-
ruptive movements, shak-
ing, wobbling (objects),
breathing in deeply, etc.
Repeat measurement
after 3-5 minutes rest.
Possible factors (depend-
ing on the severity of the
arrhythmia) affecting the
measurement results must
be discussed with your
doctor.
Measured values
too high
Too little rest before the
measurement.
Repeat measurement
after a break of approx.
3-5 mins. Do not move
arm. Do not talk.
Unusual meas-
ured values
Movement or talking dur-
ing measurement, resting
time not observed, feet
possibly crossed, smoking
or drinking coffee.
Check conditions and
repeat measurement.
Observe instructions for
use Page EN-54.
Display 0
0
Start/Stop button acciden-
tally pressed while battery
was being changed.
Switch unit off and then
on again with Start/Stop
button, if necessary.
Failure
encountered
Possible cause
Corrective action
Measurement
was interrupted
and cuff first
deflated and
then inflated
Unit detects a fault or
that diastolic value is
too low.
Unit shows no fault.
Repeat measurement.
Movement during
measurement.
If necessary, interrupt
measurement, measure
again after a break of 5
minutes.
No display after
unit is switched
on
Batteries inserted
incorrectly.
Check position of
batteries.
Batteries flat.
Change batteries.
Battery contacts dirty.
Clean battery contacts.
No display after
Memory button
is pressed
No measured values
stored.
Take a new measurement.
Measurement
interrupted
Batteries flat.
Change batteries.
Measured values
extremely high
or low
Incorrect measurement
position.
Repeat measurement,
ensuring correct body
posture. Do not move
your arm and do not talk.
