EN-58
english
Operating the unit
C
EN-59
english
Operating the unit
C
Set the month with the Memory button
and confirm this with the Start/Stop
button. Set the day, hours and minutes in
the same way.
Changing the date/time
To change the date/time function, take out a battery and wait until the
display goes blank. Now you can reactivate the date/time function and reset
the values.
Deactivating the date/time function
To deactivate the date/time function, press the Start/Stop button and then
immediately the Memory button.
When the date/time function is activated, the time is also
shown in the display when the unit is switched off.
Attaching the unit
6.
The special double-preformed comfort cuff is easy to attach and provides for
a perfect fit during measurement. The materials used have been tested for
skin compatibility in accordance with ISO 10993.
Expose your wrist, with the palm of your hand facing upwards.
•
Slide the unit over your wrist. Make sure the
gap between your wrist and the top edge of
the cuff is approx. 1 cm.
•
Now pull the free end of the cuff tight and
close the cuff with the Velcro-type fastener.
•
Thanks to its optimised shape, the cuff fits very tightly to prevent measure-
ment errors.
