EN-56
Operating the unit
EN-57
Frequently asked questions
When to measure and how often?
Once the cycle start has been input, you can take your temperature
measurements. Begin the morning after before getting up. What is
important is that you have slept for at least 5 hours and you have not
got up in the hour prior to measurement. You do not have to continue
measuring when cyclotest® 2 plus displays the long infertile phase af-
ter ovulation, i.e. no baby symbols are shown.
Fig. no. 25
Now you do not have to continue measuring
until menstruation.
If one or two measurements have failed, this is not important. Simply
carry on as normal on the next day. If there are too few measurements
that can be evaluated in a cycle, the unit, to be on the safe side, dis-
plays a longer fertile phase than usual.
37,4
37,2
37,0
36,8
36,6
36,4
36,2
36,0
35,8
35,6
35,4
Date of printout:
Serial number:
Menstruation calendar:
1st day of period
Cycle length in days
1st day of increased
temperature on the day
CY input on the day
Cycle days
37,6
5
10
15
20
25
30
35
40
45
www.cyclotest.de
Better measurement.
Current day
Non-fertile
Fertile
Highly fertile
04.03.2010
08.02.2010
27.01.2010
12.12.2010
01.12.2010
24.11.2010
13.11.2010
-
-
-
-
-
28
25
13
28
28
28
28
-
-
-
-
-
13
13
13
13
-
-
13
-
-
-
-
-
14
13
-
13
-
13
-
-
-
-
-
-
31.03.2010
1-910-5
28
The cyclotest® control software with USB connecting cable is avail-
able as an accessory from all good pharmacies. Art. no. 065501, PZN
5103265.
Example of a fertility profile cre-
ated with the cyclotest® control
software.
To ensure communication between cyclotest® 2 plus and your PC, you
will need the cyclotest® control software. This software contains the
drivers for the USB port and the cyclotest® program for evaluating the
stored data.
Important:
With each initial measurement in the cycle you determine
the time window of 4 hours for the daily measurement. You can there-
fore decide anew for each cycle whether you want to stick with the
selected time or opt for a new time.
Turn off wake-up alarm
If you do not want to be disturbed, e.g. you want to have a lie-in at the
weekend, you can turn off the wake-up alarm. To do so, press the large
round Measurement button once briefly when the unit is switched off.
You will see the following display:
Summary of Contents for Cyclotest 2 plus
Page 70: ......
