english
english
EN-52
EN-53
Technical information
Technical information
E
E
Operating mode:
Continuous operation
Classification:
Internally powerd ME Equipment
4. Original spare parts and accessories
The following original spare parts and accessories are available
from specialist dealers:
Subject to technical modifications.
• Cuff type H5 (for wrist circumference 12.5-21.5 cm)
Part no. 2105001, PZN-06414493
5. Metrological inspection
Generally, it is recommended that a metrological inspection is
performed every two years. However, professional users in Ger-
many are obligated to do so in accordance with the “Medical
Products Operator Ordinance” (Medizinprodukte-Betreiberver-
ordnung). This can be performed either by UEBE Medical GmbH,
an authority responsible for metrology or an authorised mainte-
nance service. Please refer to your national regulations.
6. Explanation of symbols
This product complies with Council Directive 93/42/
EEC of 5 September 2007 concerning medical devices
and bears the mark CE 0123 (TÜV SÜD Product Service
GmbH).
0123
Important: No modifications, e.g. opening the device (except to
replace the batteries), may be made to this device without the
manufacturer’s permission.
Upon request, responsible authorities or authorised mainte-
nance services receive a “Test instruction for metrological inspec-
tion“ from the manufacturer.
Please only submit the device for metrological inspection togeth-
er with the cuff and the instructions for use.
Reference number = item number
Degree of protection against electric shock TYPE BF
Device serial number
Consult the instructions for use
Keep dry
Manufacturer
Protected against solid foreign particles with a diameter
of more than 12.5 mm, no protection against water.
IP20
Batteries and technical appliances must not be disposed
of with domestic waste, but should be handed in at the
appropriate collection and disposal points.
7. Disposal
© Copyright Gebrauchs.info
