6
RECHARGE JACK.
This jack receives the plug from the
recharger. The recharger is designed to plug into an electrical
outlet.
TO CHARGE THE UP2000 Ultraprobe
Insert Ultraprobe plug (black) into Ultraprobe 2000 Recharge
jack and then plug the recharger into an electrical outlet.
Make sure that the LED on the charger is blinking when recharging.
The LED remains solid when the battery is charged. The instrument may stay connected
to the charger without damaging the battery. Charge time is approximately 4 hours.
WARNING:
Use the supplied UE Systems recharger (BCH-2) only. Use of unauthorized
rechargers will void the warranty and may degrade or damage the battery.
WHEN TO RECHARGE:
When the red low level indicator light illuminates, IMMEDIATELY
recharge the Ultraprobe. If the instrument is not used for a week or more, recharge it. If the
Ultraprobe is not used for a few days, it can be used without recharging, however, for best
results, it is advisable to recharge it as a "booster" for about an hour before using.
TO CHARGE THE ULTRAPROBE 2000 WTG-1
(Warble Tone Generator)
Insert Tone Generator plug
(yellow)
into Warble Tone Generator
Recharge jack and then plug the recharger into an electrical outlet.
Make sure that the LED on the charger is blinking when recharging.
The LED remains solid when the battery is charged. The instrument may
stay connected to the charger without damaging the battery. Charge
time is approximately 4 hours.
WARNING:
Use the supplied UE Systems recharger (BCH-2) only. Use of
unauthorized rechargers will void the warranty and may degrade or damage the
battery.
