IPC4100 Hardware Manual
C
UDP Co., Ltd.
12
The device which is connected at end of line, whether it be a dome camera or joystick controller,
he dome camera must be installed by qualified service personnel in accordance with all local
must have the cable for communication terminated by setting the appropriate DIP switch.
Without proper termination, there is potential for control signal errors. Total length of the
cable for communication should not exceed 1.2Km.
Figure 7. Setting Unit for Termination
T
and federal electrical and building codes. The system should be installed according to Figures 2
through 10.
Figure 8. Termination Diagram
3.5. Setting Address(ID) of Dome Camera
9 10
Function
ON ON Termination
OFF OFF N
ot
Terminated
ON
1 0
9
Termination
* Factory Mode : Not Terminated
