RFT-868-USB
Release A - 01/09/2015
Copyright 2015 Udoit Srl - All rights are reserved
www.udoit.eu
DESCRIPTION
The RFT-868-USB is the RFTide interface which permit to setup and manage the RFTide network.
It is used as Network ID authorizer: it comes out from the factory with a unique serialized Network
ID, which it will be added to all the other devices in order to grant the access. This device has the
characteristic to be the only one central communication node in the network, which all the other
devices refer to. The learning procedure is always the same for all the devices and the RFT-868-
USB defines the Node ID for each component.
After every learning procedure the new RFTide nodes will keep in memory the ID of the usb and
depending on the device will use it for alarms, button pressed and status messages (see RFT-868-
MAG, RFT-868-PIR. RFT-868-4CH and RFT-868-RELAY-S manuals) . For its controlling access
and to have full management of the network a Control Unit must be connected to the RFT-868-USB
device in order to setup and configure the RFTide network.
Figure 1 External view of the RFT-868-USB device
