INPUTS:
=>
channel 1 and 2
switchable instrument or microphone input as combi-socket, XLR + jack ¼”
(6.35 mm) and clip indicators, min. dynamic headroom: 8 dB
-> line mode
high impedance jack input for instruments (pick-ups directly), unbalanced and
line-level sources
impedance
:
2.2 Meg
sensitivity:
22 mV (–33 dBV) (high/low attenuator: –10 dB via jumper)
equivalent input noise
:
A-weighted:
1 uV (–120 dBV)
-> mic mode
XLR- , balanced and stereo jack socket, unbalanced
impedance: XLR,
balanced:
1.2 kOhm
impedance: jack,
unbalanced:
2.7 kOhm
sensitivity:
3.3 mV (–50 dBV)
voice filter:
–10 dB at 270 Hz (referred to 10 kHz)
equivalent input noise:
A-weighted:
0.8 uV (–122 dBV)
phantom power:
(XLR only):
48 V, max. 10 mA, short-circuit protected
=>
return:
unbalanced jack input, ¼” (6.35 mm), pre-master
sensitivity:
320 mV (–10 dBV)
impedance:
19.7 kOhm (note: impedance changes to 4.7 kOhm when external
effect is switched OFF)
=>
aux in:
TRS stereo input, 3.5mm
OUTPUTS:
=>
phones:
headphones, jack socket, stereo, L/R connected,
¼” (6.35 mm)
input Impedance:
470 Ohm (common for L and R)
(!)
Please note:
Use TRS (Stereo Jacks) only. Does not work with mono jacks!
When plugged in, internal speaker is muted!
=>
send:
jack socket, unbalanced, ¼” (6.35 mm), pre master,
output voltage:
1.4 V (+3 dBV)
=>
line out 1 and 2:
jack socket, unbalanced, preamp out, ¼” (6.35 mm),
post effect, post EQ and master
output voltage 2:
1.74 V (+3 dBV)
output voltage 1:
0.33 V (-4.6 dBV)
=>
DI-out 1 and 2:
balanced XLR socket, pre/post EQ (sitchable by jumper)
post effect and master
1 = ground 2 = positive 3 = negative
differential output voltage:
140 mV (–17 dBV)
FOOTSWITCH
=>
footswitch
:
TRS jack socket ¼” (6.35 mm) to connect latching dual foot
switch.
tip
= built-in effect on/off,
ring
= parameter adjust or additional effect on/off ,
sleeve
= common (ground)
(!)
Please note:
Effect is OFF when the footswitch is ON
.
EQ - Tone Controls
=>
channel 1:
tone:
–3 dB at 700 Hz, +7 dB at 8 kHz
bass:
8 dB at 100 Hz (shelf type)
middle:
6 dB at 800 Hz
treble:
8 dB at 10 kHz (shelf type)
6. Technical Data
12
