background image

3

www.udirc.com

Important Statement

Thank you for buying UDIRC's product .The drone is different from other ordinary

toy. People who are under 14 years old must not use the product. To better use

this product and ensure your safety and other people’s security, please read this

brochure carefully before using it. You are regarded as accepting all content in

this user manual when using this drone.
This product is a piece of complicated equipment which is integrated with 

professional knowledge by mechanic, electronic, air mechanics, high-frequency

emission etc. User should fly legally in safe range of outdoors or indoors. The 

users promise to be responsible for their behavior when using this product. The

users promise to use the drone for legal purpose, and agree to obey above rules

and local laws and regulations.
We undertake no liability for those accidents caused by environment, illegal 

behavior, improper operation, refitting of the drone and personal reason after sale

of the product.
We have entrusted the distributor to provide technology support and after-sale

service. If you have any questions about use, operation, repair etc., please

contact the local distributor.

This drone is suitable for experienced RC drone user aged 14 years or above. 

This product contains small parts, please put it out of child’s reach.

The flying field must be legally approved by your local government. Do not fly the

drone near in the airport. Keep far away from the airport more than 5km when

flying a RC drone. Flying field must spacious enough and we suggest at least 

8M (length)*8M (width)*5M (height).

(1) Flying Area

* Please only use UDIRC’s attached spare parts or purchase the original version of
   UDIRC’s spare parts to replace the damaged parts. Or we undertake no liability for

   those accidents caused by replacement.
* Keep the packing and user manual so as to refer to the important information whenever.

Safety Precautions

(3) Keep away from obstacles and crowd

The speed and status of a flying RC drone is uncertain and it may cause potential

danger. So the user must keep away from crowd, tall building, power lines etc. 

when operating a flying RC drone. Do not fly a RC drone in rainy, storm, thunder

and lighting weather for the safety of user, around people and their property.

(2) Use correctly 

Improper assembly, broken main frame, defective electronic equipment or unskilled

operation all may cause unpredictable accidents such as drone damage or human

injury. For beginner, we suggest learning the operation skill from experienced RC

drone user in the first flight. Please pay special attention to safety operation and 

have good knowledge of accident responsibility that the user may cause.

Summary of Contents for SLRD40

























Reviews: