①
②
When the propellers get stuck, then activate stuck protection function and the motors stop
running.
Pull down the left stick to the lowest position and then go back to the center, stuck protection
will be released and the drone can fly again.
Stuck Protection
Out of range alarm
When the drone is out of the remote control distance, the transmitter will continues to sound
“didi...didi...didi” to alarm the user to return the drone immediately.
Parts Replacement
Propeller Replacement
Attention
①
Switching sequence. At first, turn on the power of the transmitter, then turn on the power of the
drone. After the end, turn off the power of the drone first, and then turn off the power of the
transmitter.
Improper operation caused the crash. It is necessary to check and confirm the connection of the
motor
，
propeller or battery of the drone and the damage degree, so that the drone can fly
again. If there is damaged, please replace the new accessories or prone to accident.
②
B
B
B
A
A
A
There is different A and B remarks on the propeller. Be sure that the propellers are installed
to the correct motors, which remarked the Letters to identify on the motor holder, if not, then
the drone can not work normally.
Disassembly:
hold the propeller vertically and then pull the propeller out.
Installation:
mount propeller aim the central shaft of the motor and press down.
Disassembly
Installation
Please make sure the
propeller are installed
correctly, otherwise
the drone cannot fly.
09
