background image

Heading Hold Mode

Aerial photography

The return home function is only available when the drone is in Heading Hold Mode. 

Make sure the drone is in front of the users. Wrong position may cause the drone fly to other 

direction.

Press the "Return Home" button, the transmitter will sound “di”, and the drone will fly back to 

the users. Pull down the Left Stick slowly to land the drone when the drone fly back and close to 

the user.

Press the "Photo" button once, the 

transmitter will sound “di” to take 

a picture.

Photos

Long press the "video" button, the transmitter 

will sound “didi” to enter the recording state, 

to repeat this action to stop recording and 

save video.

Video

Notes for Filming

① 

The photos and videos are stored in the phone local gallery, you can display in the phone directly.

② 

App must be authorized to access the phone gallery, if not, then may be unavailable to display 

      the video and photos.

/

/

/

/

/

Front

Rear

Must be ensure that the drone's front 

is consistent with the polot's front.

Heading Hold Mode means that the user can operate 

the drone without having to distinguish directions.

Start:

 Press the "              " button, the transmitter will 

            sound "didi" to enter the Heading Hold Mode.

Off:

 Press again, the transmitter will sound "dididi" to 

        exit the Heading Hold Mode.

/

06

Summary of Contents for U61S











Reviews: