①
Switching sequence. At first, turn on the power of the transmitter, then turn
on the power of the drone. After the end, turn off the power of the drone
first, and then turn off the power of the transmitter.
②
Improper operation caused the crash. It is necessary to check and confirm
the connection of the motor
，
propeller or battery of the drone and the
damage degree, so that the drone can fly again. If there is damaged, please
replace the new accessories or prone to accident.
Attention
Calibration
(This action is used when flying abnormally)
Tips: When the drone doesn’t appear to use the trim correction flight status, or being
hit hard (or falling abnormally). thus cause the difficulties in controlling. Now
frequency making and adjustment are needed again, drone should be placed on
horizontal ground.
After the calibration of the compass, the right
control lever of the remote control is pushed
to the lower right corner by 45°, and the
remote control emits a sound of "di",and the
aircraft light flashes and releases,indicating
that the gyroscope has been calibrated.
Flying Trimmer
Left / Right Rotates Trimmer
When flying, if the drone head rotates to the left, push the
right stick down , meantime push left stick to right.
Otherwise push it to the left.
Forward / Backward Trimmer
Press down
Press down
Press down
When flying, if the drone tilts forward , push the left stick
down and push the right stick down.
Otherwise push it up.
Left / Right Tilts Trimmer
When flying, if the drone tilts to the left, push the right
stick down,meantime push the right stick to the right.
Otherwise push it to the left.
13
