udir/c U52G, Operation Guidance, Page: 16 / 24

15
www.udirc.com
Press down the right stick, the transmitter will make the sound of “di”, then it
goes to the function of encircling flight. The drone will fly to a default radius then
it waits for the direction controlled by the user. Adjust the speed and direction of
the drone by manipulating the right stick. It is the minimum radius of the default
radius acquiescently ,so drone flies only in the sub range.
Encircling flight
In the state of encircling
flying, the left stick
could only control
the height of the drone.
Turn left, the drone flies
clockwise; Move further, the
fllying speed will become faster.
Go downside to enlarge the
radius of encircling.
Go upward to narrow the
radius of encircling.
Turn right, the drone flies
counterclockwise; Move further,
the speed will become faster.
Press down
Intelligent flight control can calculate the suspended height.
The aim of fixed point mode+constant height mode=spot hover is to let the
flight more flexible, to take photos more clear, to be operated more easily.
* This section is GPS location fixed-point. So before flying, please make sure
that it has connected to GPS signal normally. Or it will become invalid.
Fixed Point Mode
Constant Height Mode
Notice: If there’s propeller deformation or motor damage, then the fixed height
function can not be used. Atmospheric pressure instability or typhoon
weather, high altitude function can not be used normally also.
Intelligent flight control can calculate the suspended height,it has more stable
control performance to make the beginner operate it easily. So please release the
rocker, the drone can automatically suspended to meet the needs of single hand
manipulation. The aerial photograph is more clear.