udir/c U52G, Operation Guidance, Page: 11 / 24

10
www.udirc.com
Flying steps
Opposite frequency
Turn on the power.
Press the key of power for two seconds to start the drone, it makes the
right frequency successfully. Then the left navigation light keeps shiny,
while the right navigation light is off. Thus shows that it enters the state of
compass level calibration.
Pull the left stick to the lowest position and
let go, the light goes off slowly.
It indicates the transmitter enters the
frequency state.
It must be placed on the
horizontal ground
！
Compass calibration
Rotate the drone horizontally (Picture 11) till it sounds long deep, it indicates that
horizontal correction is completed. The left navigation light turns to long bright
and when the right navigation light keeps shiny, it enters the state of vertical
correction.
Vertical rotating the drone (Picture 12) until it sounds long deep, it indicates that
the vertical rotating is completed. Now the four navigation lights rotate and flicker.
Picture 11
Level Correction
Picture 12
Vertical correction
Tips: It’s a must to have the right compass adjustment first each time you
start the drone, or it can’t work normally.