4
3
Mobile Phone Installation
When take out the phone clip,
you need to press the clip buckle
behind the phone clip. So that the
buckle can be closed and
removed easily.
①
Put the phone
clip into the jack.
②
Pull the phone holder clamp,
place the phone in the upper
and lower clamps, and the
clamp will automatically clamp
the mobile phone.
Pay attention to don't clip
the buttons on the side of
the phone.
Phone
(Not Include)
Battery Installation
Battery Installation
Transmitter preparation
①
Put the Helicopter battery into the
battery slot on the belly of the
fuselage.
Installation
Disassembe: Operation in reverse order.
②
Then connect the battery
plug to the battery jack.
Helicopter
Battery
Indicator Light
Photo
Video
Phone Clip Jack
Left Stick /
Trimmer (Press Down)
Right Stick
Speed Switch
Take Off / Landing /
Emergency Stop Button
Power Switch
Notice: Taking photo and recording video are available after connecting with
smart phone.
▲
Only use the original charging
line; suggest select Adapters
with output current of 5V 2A .
USB adapter
(Not Include)
②
①
Original USB
Charging Cable
4×1.5V AA Battery
Battery Cover
Back
Open the battery cover of the Transmitter and place the same type of
battery with saturated capacity according to the '+-' electrode indication in
the battery cell (Not include).
