10
11
Note: Do nor move the drone during calibration.
Place the drone on a flat surface on the horizontal position. Keep the
Left Stick on the lowest position and push the Right Stick to bottom
right as below picture shown. The drone drone body lights flash rapidly
and the drone is calibrating. Later the drone body lights get solid, which
indicates successful calibration.
6. To calibrate.
To Pair The Camera And Transmitter
Operation Instruction of Camera
Press “ UP” button for 6 seconds
VIEW
REC
SNAP
UP
DOWN
1. Press “UP” button for about 6 seconds till the pairing menu appears.
2. Press “PAIR” button and a 8 seconds countdown appears on the
screen and then enters pairing search. The video menu will appear
after successful pairing. Meanwhile, the transmitter will remember its
paired camera automatically. Next time you need not to pair again.
If you want to pair the transmitter with other camera. Restart the
transmitter and repeat step 1 and step 2.
Notice: Do not move the Left Stick while pairing the camera and the
transmitter to avoid inadvertently starting the drone.
Press “PAIR” Button
PAIR
EXIT
To Record Video
After successful pairing, the screen will enter video menu and show a
green SD card icon at the top, which indicates the SD card had inserted
to the camera (or the SD card icon will appear in red and flash if the
card fail to insert to the camera). To record video, press “REC” button to
start recording. At the same time, the “REC” icon will flash. Press “REC”
button again to stop recording and the video will be stored in SD card.
Tip: The screen will show a “FULL” icon if the card is full storage and no
more video can be stored in the card.
2.Video Recording Button
3. “REC” starts to flash
1. Green SD Card Icon
VIEW
REC
SD
REC
SNAP
UP
DOWN
