Before using the code reader, make sure to provide power to the code
reader.
The unit operates on any of the following sources:
● 12-volt vehicle power
● USB connection to personal computer.
3.2 Providing Power to Code reader
3.2.1 Connecting to Vehicle Power
The code reader normally powers on whenever it is connected to the
data link connector (DLC).
To connect to vehicle power:
1.Turn the ignition off.
2.Locate the data link connector (DLC). The DLC is generally located
under the dash on the driver side of the vehicle.
3.Connect the code reader with the DLC.
4.Switch the ignition key to the ON position.
5.The code reader automatically boots up.
IMPORTANT
Never try to provide power for the code reader from USB connection when
the code reader is communicating with a vehicle.
