manualshive.com logo in svg

UDIAG CR700, User Manual

Share
Download
UDIAG CR700 User Manual Download Page 22

● LED Test

5.6.1 Display Test

Selecting Display Test option opens a screen that allows you to check the 
functionality of the display.
To test the display:
1.Use the UP/DOWN key to highlight Display Test from Setup menu and 
press the OK key to start test.
2.Check if there are any missing spots in the LCD screen.
3.To quit the test, press the ESC key.

5.6.2 Keypad Test

Selecting Key Test option opens a screen that allows you to check the 
functionality of the keypad.
To test the keypad:
1.Use the UP/DOWN key to highlight Keyboard Test from Setup menu 
and press the OK key.
2.Press any key to start test. Key name or scroll direction should show 
on display when you press a key. Double press ESC to return.

5.6.3 LED Test

Selecting LED Test option opens a screen that allows you to check the 
functionality of the LED.
To test the LED:
1.Use the UP/DOWN key to highlight LCD Test from Setup menu and 
press the OK key to start test. 
2.Scroll with the up and down arrow keys to select the desired LED 
lamps to check. The LED should turn on/off according to the selected 
commands. 
3.To quit the test, press the ESC key.

5.7 Update Mode

Summary of Contents for CR700



























Reviews:

No comments

Brands by name

Popular brands

Load more brands