F
2
3
4
5
6
7
8
1
Menu F1:
Red Led
ON
Choice of the input
from 1 to 8.
Pushing the associated
function button
F
2
3
4
5
6
7
8
1
Choice of the output
from 1 to 8 for adding
or removing.
Pushing the associated
function button
Menu F2:
Red Led
OUTPUT TEL.
OFF
Programming Menu F1: choice of the Input to program (E8 in the Example)
3.1.2. Configuration of a musical input - Menu F2
After choosing the input to configure, pressing the key F gives access to the Menu F2 (choice of the outputs
attributed to a musical input).
Programming Menu F2: Configuration of the outputs to attribute to a musical input (E8 in the Example)
3.1.3. Configuration of an input with telecommand (PZ-39, GD-26) - Menu F3
The previous configuration is shown. If the input is configured as a musical input, at least a green led (output)
illuminates. If the input is configured as an input with telecommand, the green leds of the outputs switch off.
In the Example above, Input N°8 is configured as a musical Input (outputs : 1,2,3,4,5,6,7 and 8).
For choosing or removing an output it is enough to push the associated function button.
It is necessary to access to the Menus F1 and F2 before accessing the Menu F3, (see the previous chapters).
To access the function F3 it is compulsory to unselect every output of the input on the Menu F2. This action
indicates to the Matrix that the Input is not a musical input.
After having unselected every output on the Menu F2, pressing the key F one access to the Menu F3 (choice of
the outputs attributed to one input having a telecommand).
3.1.1. Choice of the input to configure - Menu F1
Once being into the programming Mode, the red led "INPUT" illuminates. The 1rst time, the Matrix proposes the
input N°1 (INPUT 1 selected: green led illuminates).
If you wish to program input N°8 as a musical input, it is enough to push the FUNCTION N°8 button to choose
input N°8.
12
MX-100B