Uconnect Touch 8.4, Owner'S Manual

Page: 16 / 149

Undo
You can backspace an entry by pressing the
bottom left “Undo” button or the
button on the
touchscreen.
GO
Once the last digit of a station has been entered,
the DIRECT TUNE screen will close and the
system will automatically tune to that station.
The selected Station or Channel number is
displayed in the Direct Tune text box.
Setting Presets
The Presets are available for all Radio Modes,
and are activated by pressing any of the six
“Preset” buttons on the touchscreen, located at
the top of the screen.
When you are receiving a station that you wish
to commit into memory, press and hold the
desired numbered button on the touchscreen for
more than two seconds or until you hear a
confirmation beep.
The Radio stores up to 12 presets in each of the
Radio modes. A set of 6 presets are visible at
the top of the radio screen.
You can switch between the two radio presets
by pressing the “arrow button” located in the
upper right of the radio touchscreen.
Browse in FM/AM/MW/LW/SW/DAB/DAB+/
DMB
When in any radio mode, the Browse Screen
provides a means to edit the Presets List and is
entered by pressing the Enter/Browse button.
Scrolling Preset List
Once in the Browse Presets screen, you can
scroll the preset list by rotation of the TUNE/
SCROLL knob, or by pressing the “Up and
Down” arrow keys, located on the right of the
screen.
Preset Selection From List
A Preset can be selected by pressing any of the
listed Presets, or by pushing the ENTER/
BROWSE button on the TUNE/SCROLL knob to
select the currently highlighted Preset.
When selected, the radio tunes to the station
stored in the Preset.
Deleting Presets
A Preset can be deleted in the Presets Browse
screen by pressing the “Trash Can” icon for the
corresponding Preset.
Return To Main Radio Screen
You can return to the Main Radio Screen, by
pressing the “X” button, or the back arrow
button, on the touchscreen when in the Browse
Presets screen.
Audio
Press the “Audio” button on the touchscreen to
activate the Audio settings screen to adjust
Balance/Fade, Equalizer, Speed Adjusted Vol-
ume, Aux volume Offset, and Surround Sound.
You can return to the Radio screen by pressing
the “X” located at the top right.
Balance/Fade
Press the “Balance/Fade” button on the touch-
screen to Balance audio between the front
speakers or fade the audio between the rear
and front speakers.
Pressing the “Front,” “Rear,” “Left,” or “Right”
buttons or press and drag the red Speaker Icon
to adjust the Balance/Fade.
15