Uconnect 3, User Manual

Page: 16 / 42

3. The Audio Menu shows the following options for you to
customize your audio settings:
•
Auto Play
— Press the “Auto Play” button on the touchscreen to
select between ON or OFF. This feature determines if
music automatically starts playing from a device when
it if first connected to the Media hubs USB port.
•
Equalizer
— Press the “Equalizer” button on the touchscreen to
adjust the Bass, Mid and Treble. Use the “+” or “–”
buttons on the touchscreen to adjust the equalizer to
your desired settings. Press the “Back Arrow” button
on the touchscreen when done.
•
Balance/Fade
— Press the “Balance/Fade” button on the touchscreen
to adjust the sound from the speakers. Use the “arrow”
button on the touchscreen to adjust the sound level
from the front and rear or right and left side speakers.
Press the Center “C” button on the touchscreen to reset
the balance and fade to the factory setting. Press the
“Back Arrow” button on the touchscreen when done.
•
Speed Adjustable
— Press the “Speed Adjusted Volume” button on the
touchscreen to select between OFF, 1, 2 or 3. This will
decrease the radio volume relative to a decrease in
vehicle speed. Press the “Back Arrow” button on the
touchscreen when done.
•
Loudness
— Press the “Loudness” button on the touchscreen to
select the Loudness feature. When this feature is acti-
vated it improves sound quality at lower volumes.
Clock Settings
1. If a SETTINGS button on the right side of faceplate
exists, push this button. If not, push the MORE button
on the faceplate then the “Settings” button on the
touchscreen.
2. Select the “Clock and Date” button on the touchscreen.
3. Next, select “Set Time” to change the time.
4. Select “Set Date” to change the date.
5. To set the time, select the “Seek Up” or “Seek
Down” arrows as appropriate. Select “12 hrs vs
24 hrs”, “AM” or “PM” or select the “Time Zones” (if
equipped).
6. Select “Done” when complete.
3
RADIO MODE 15