Uconnect 3/3, Owner'S Manual

Page: 38 / 90

Inserting Auxiliary Device
Gently insert the Auxiliary device cable into the AUX Port.
If you insert an Auxiliary device with the ignition ON and
the radio ON, the unit will switch to AUX mode and begin
to play when you insert the device cable.
Controlling The Auxiliary Device
The control of the auxiliary device (e.g., selecting playlists,
play, fast forward, etc.) cannot be provided by the radio;
use the device controls instead. Adjust the volume with the
ON/OFF VOLUME rotary knob, or with the volume of the
attached device.
NOTE: The vehicle radio unit is acting as the amplifier for
audio output from the Auxiliary device. Therefore if the
volume control on the Auxiliary device is set too low, there
will be insufficient audio signal for the radio unit to play
the music on the device.
Source
Press the “Source” button on the touchscreen to select the
desired audio source, Disc/USB/SD Card/AUX/ or
Bluetooth. This screen will time out after a few seconds and
return to the main radio screen if no selection is made.
Audio
Refer to “Audio” in “Radio Mode” for further information
on adjusting the audio settings.
SD CARD MODE
Overview
SD Card Mode is entered by inserting a SD Card containing
music into the SD Card slot above the Disc slot on the
Instrument Panel or by pressing the “Player” button lo-
cated at the bottom of the display. Once in Player Mode,
press the Source button and select SD Card.
4
MEDIA MODE 37