UCL SWIFT TEK-1, Training Manual

Page: 12 / 45

QUICK START GUIDE
The LSSM dual laser source is a singlemode test laser used for verifying the proper function of fiber optic
networks. This document will serve as an overview of the major features and functions of the device and offer
tips for troubleshooting common issues in optical networks.
FEATURES
CONNECTOR ADAPTER
( Interchangeable)
WAVELENGTH INDICATOR
LOW BATTERY INDICATOR
POWER BUTTON
2 KHZ BUTTON
WAVELENGTH BUTTON
EXTERNAL POWER PORT
NORTH AMERICA
Laser Light Source - SM
LSSM
INTRODUCTION
Connector Adapter
Wavelength Indicator
Power Button
Change Wavelength
Button
1
2
3
4
5
6
7
1
2
Low Battery
Indicator
3
4
2kHz Button
External Power
Port
The LSSM comes with an SC screw-on adapter. Additional adapters are
available from SWIFT.
This unit offers 1310nm and 1550nm wavelengths. When the LSSM is
turned on, the red light indicates which wavelength is selected. The red
light blinks to indicate when the 2kHz modulation is turned ON.
A red indicator light appears when the CR2 battery power is low.
Replace or recharge the battery, depending on the battery type, to
return to normal operation of the LSSM.
Use to turn the LSSM ON and OFF. The unit will turn off automatically
after 15 minutes. To bypass auto-shutoff, hold the power button for 5
seconds when turning ON.
Toggles the modulation of currently-selected wavelength output. The
laser flashes at 2000 times per second to provide a recognizable signal
to a companion power meter. Output power of the laser is reduced by
3dB when the modulation is active.
Switches between the 1310nm and 1550nm wavelength.
The port accepts the PSD1 power supply. The power supply is not a
battery charger - just a battery bypass.
5
6
7