Takeaway Desk Assembly Instructions
Version 1.1 01/04/2020
Design
|
Manufacture
|
Deliver
1300 824 824
Australia Wide
www.
uci
.com.au
Page 2
2.
Using a P2 Phillips bit, drive a screw (C) through each hole on the leg flange.
3.
Repeat steps 1 and 2 for each leg on the desk, making sure the leg positioning is correct and a screw has
been used on every hole.
4.
Turn the workstation over and place in your desired location and wipe down all surfaces with a non-abrasive
cleaner. IE Spray & Wipe. If the surface the workstation is sitting on is not level, the feet of each leg can be
levelled by adjusting the glides.
Important Notes:
-
Warranty 7 year structural.
We recommend 2 Persons for this process.
