(4) Press the CHECK key on the collator’s operation
panel to collate a set of paper and check the position
of each guide.
Caution!
・
Set the guides in the position where an opening 2 to 3
mm wide will be left between the paper and each of
the right and left guides, as well as an opening 5 to
20mm wide between the paper and the butt guide.
When the stacker is connected with a single
collator, leave an opening about 5 to 20mm and set
the position where the paper is neatly collated.
・
In case the right and left edges of collated sheets are
not aligned sheet by sheet, set the paper guides to
closely fit the paper.
(5) Press the START/STOP key on the collator to start
collation.
(6)
When collation is finished, press the DOWN
key to lower the dolly.
- 9 -
