UCHIDA AEROCUT G2, Operation Manual, Page: 22 / 58

２１
(14) How to adjust the depth of perforation
①
Change in the paper thickness, recommend you adjust the depth of Perforation.
②
The height of the upper blades can be individually adjusted.
③
Remove the perforator by reversing the procedure described in (12) (How to attach the
perforator).
④
Shift the perforator lock lever to the right and raise the upper blades.
⑤
Adjust a height adjustment screw in the up direction if it is cutting into too deeply, and in the
down direction if not cutting into sufficiently.
Up=Shallow
Down=Deep
Caution
Avoid contacting the cutting edge of the
perforating blade. Otherwise, injury could occur.
Shallow
Deep
Height adjustment screw
Perforator lock lever
Perforator cartridge cover
Knurled head screw