2005 UCAN FASTENING PRODUCTS
2
Note: Do not operate the PA 5000 until you have read and completely understand the
safety and operations
sections of this manual.
PA 5000
GENERAL SAFETY RULES
GENERAL SAFETY RULES - FOR ALL BATTERY OPERATED TOOLS
1
WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS.
2 Work
area
2.1
Keep your work area clean and well lit.
Cluttered benches and dark areas invite accidents.
2.2
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or
dust.
Power tools create sparks which may ignite the dust or fumes.
2.3
Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose
control.
3 Electrical
safety
3.1
Do not abuse the cord. Never use the cord to carry the tool. Keep cord away from heat, oil, sharp edges, or
moving parts. Replace damaged cords immediately.
Damaged cords may create a fire.
Applies only to tools with a separable battery pack. (Separable means in a separate enclosure from the tool and connected to the tool by a cord).
3.2
A battery operated tool with integral batteries or a separate battery pack must be recharged only with the
specified charger for the battery.
A charger that may be suitable for one type of battery may create a risk of fire when used
with another battery.
3.3
Use battery operated tool only with specifically designated battery pack.
Use of any other batteries may create a
risk of fire.
4. Personal
safety
4.1
Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power
tool while tired or under the influence of drugs, alcohol, or medication.
A moment of inattention while operating power
tools may result in serious personal injury.
4.2
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves
away from moving parts.
Loose clothes, jewelry, or long hair can be caught in moving parts.
4.3
Avoid accidental starting. Be sure the switch is in the locked or off position before inserting the battery pack.
Carrying tools with your finger on the switch or inserting the battery pack into a tool with the switch on invites accidents.
4.4
Remove any adjusting keys or wrenches before turning the tool on.
A wrench or a key left attached to a rotating
part of the tool may result in personal injury.
4.5
Do not overreach. Keep proper footing and balance at all times.
Proper footing and balance enable better control
of the tool in unexpected situations.
