background image

UBTECH CADEBOT USER MANUAL

FCC Warning

˖

˖

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s 

authority to operate the equipment. 

This  device  complies  with  part  15  of  the  FCC  Rules.  Operation  is  subject  to  the  following  two  conditions:(1)  This 

device may  not  cause harmful  interference  ,  and  (2)  this  device must  accept  any  interference  received  ,  including 

interference that may cause undesired operation . 

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 

15 of the FCC Rules.   

These limits are designed to provide reasonable protection against harmful interference in a residential installation. 

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance 

with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that 

interference  will  not  occur in  a  particular installation.  If  this  equipment  does  cause  harmful  interference  to radio  or 

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to 

correct the interference

 

by one or more of the following measures:   

ü

Reorient or relocate the receiving antenna.   

ü

Increase the separation between the equipment and receiver .   

ü

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected .   

ü

Consult the dealer or an experienced radio / TV technician for help.   

FCC Radiation Exposure Statement: 

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter 

must not be co-located or operating in conjunction with any other antenna or transmitter.

This equipment should be installed and operated with minimum distance 20cm between the radiator &you body.

UBTECH ROBOTICS CORP.,LTD.

Address:

Room 2201, Building C1 Nanshan Smart Park No. 1001 Xueyuan Avenue Changyuan Community Taoyuan St

reet Nanshan District Shenzhen PRC

Website: https://commercial.ubtrobot.com

E-mail

˖

[email protected]

Summary of Contents for Cadebot-L100










































Reviews: