background image

UBX-22008565 - R01 

Document information

 

Page 2 of 11 

C1-Public  

Document information 

Title 

USB-ANNA-B4 

Subtitle 

USB for ANNA-B402 and ANNA-B412 modules 

Document type 

User guide 

Document number 

UBX-22008565 

 

Revision and date 

R01 

26-Sep-2022 

Disclosure restriction 

C1-Public 

 

 

This document applies to the following products: 

Product name 

Type number 

Firmware version 

PCN reference 

 USB-ANNA-B402 

USB-ANNA-B402-00 

N/A 

USB-ANNA-B412 

USB-ANNA-B412-00 

N/A 

 
 
 

 

u-blox or third parties may hold intellectual property rights in the products, names, logos, and designs included in this 
document. Copying, reproduction, or modification of this document or any part thereof is only permitted with the express 
written permission of u-blox. Disclosure to third parties is permitted for clearly public documents only. 

The information contained herein is provided “as is” and u

-blox assumes no liability for its use. No warranty, either express or 

implied, is given, including but not limited to, with respect to the accuracy, correctness, reliability, and fitness for a particular 
purpose of the information. This document may be revised by u-blox at any time without notice. For the most recent 
documents, visit www.u blox.com.  
Copyright © u-blox AG 

Summary of Contents for USB-ANNA-B4












Reviews: