EVK-L20, EVK-L21 - User Guide
UBX-14000422 - R03
Early Production Information
Appendix
Page 12 of 17
3.
Unified case
Command sent by DTE (user)
DCE Response (module)
Description
AT+COPS=2
OK
Deregister the MT from network.
AT+CGDCONT=1,"IP","ibox.ti
m.it"
OK
Define a PDP context with the needed APN.
AT+UCGDFLT=1,"IP","ibox.ti
m.it"
OK
Define the initial PDP context with the needed APN. This will
be activated only if the module registers to an LTE network.
AT+COPS=0
OK
Start automatic network registration.
AT+CPIN?
+CPIN: READY
OK
Check the PIN status and act accordingly.
AT+COPS?
+COPS: 0,0,"I TIM",7
OK
Check the +COPS <AcT> and act accordingly:
If <Act> = 7 (LTE) then no further action is needed
Else activate the context with +CGACT
AT+CGCONTRDP
+CGCONTRDP: 4,5,"ibox.tim.
it.mnc001.mcc222.gprs","5.
168.209.178.255.255.255.25
5","5.168.209.178","
10.207
.43.46
","10.206.56.132","0
.0.0.0","0.0.0.0",0
OK
DNS primary server address is 10.207.43.46
4.
Open “Network and Sharing Center” and click on
Local Area Connection
(associated to RNDIS interface):
