Ublox SARA-R4 Series, Command Manual

Page: 56 / 307

SARA-R4/N4 series - AT Commands Manual
UBX-17003787 - R09 7 Network service
Page 56 of 307
7.10 Read RSRP VZWRSRP
+VZWRSRP
Modules
SARA-R404M
Syntax PIN required Settings saved Can be aborted Response time Error reference Attributes
full No No No - +CME Error
7.10.1 Description
Returns the RSRP (Reference Signal Received Power) values for all LTE cells which the module is measuring.
7.10.2 Syntax
Type Syntax Response Example
Read AT+VZWRSRP? +VZWRSRP:
[<cellID1>,<EARFCN1>,<RSRP1>[,
<cellID2>,<EARFCN2>,<RSRP2>[,
...]]]
OK
+VZWRSRP:
000,2175,"-61.00"
OK
7.10.3 Defined values
Parameter Type Description
<cellIDn> Number nth cell physical cell identifier in "xxx" format. The range goes from 0 to 503.
<EARFCNn> Number nth cell EARFCN in decimal format. The range goes from 0 to 65535.
<RSRPn> String nth cell RSRP value in dBm/15 kHz where the format is "-XX.XX".
7.11 Read RSRQ VZWRSRQ
+VZWRSRQ
Modules
SARA-R404M
Syntax PIN required Settings saved Can be aborted Response time Error reference Attributes
full No No No - +CME Error
7.11.1 Description
Returns the RSRQ (Reference Signal Received Quality) values for all the LTE cells which the module is
measuring.
7.11.2 Syntax
Type Syntax Response Example
Read AT+VZWRSRQ? +VZWRSRQ:
[<cellID1>,<EARFCN1>,<RSRQ1>[,
<cellID2>,<EARFCN2>,<RSRQ2>[,
...]]]
OK
+VZWRSRQ:
000,2175,"-11.00"
OK
7.11.3 Defined values
Parameter Type Description
<cellID> Number nth cell physical cell identifier in "xxx" format. The range goes from 0 to 503.
<EARFCN> Number nth cell EARFCN in decimal format. The range goes from 0 to 65535.
<RSRP> String nth cell RSRP value in dBm/15 kHz where the format is "-XX.XX".