NORA-W36 series - System integration manual
UBX-22021120 - R01
Regulatory compliance
Page 38 of 48
C1-Public
The channels allowed while operating under the definition of a master or client device
6
are described
Channel number
Channel center
frequency [MHz]
Master device
Client device Remarks
1
–
11
2412
–
2462
Yes
Yes
12
–
13
2467
–
2472
No
No
36
–
48
5180
–
5240
Yes
Yes
Canada (ISED): Devices are
restricted to indoor
operation only and the end
product must be labelled
accordingly.
52
–
64
5260
–
5320
No
Yes
100
–
116
5500
–
5580
No
Yes
120
–
128
5600
–
5640
No
Yes
USA (FCC): Client device
operation allowed under
KDB 905462
132
–
144
5660
–
5720
No
Yes
149
–
165
5745
–
5825
No
Yes
Table 9: Allowed channel usage under FCC/ISED regulation
☞
15.407 (j) Operator Filing Requirement:
Before deploying an aggregate total of more than one thousand outdoor access points within the
5.15
–
5.25 GHz band, parties must submit a letter to the Commission acknowledging that, should
harmful interference to licensed services in this band occur, they will be required to take corrective
action. Corrective actions may include reducing power, turning off devices, changing frequency
bands, and/or further reducing power radiated in the vertical direction. This material shall be
submitted to Laboratory Division, Office of Engineering and Technology, Federal Communications
Commission, 7435 Oakland Mills Road, Columbia, MD 21046. Attn: U-NII Coordination, or via Web
site at
.fcc.gov/labhel
p with the subject line: “U
-NII-
1 Filing”.
6.4.8
End product labeling requirements
For an end-product using the NORA-W36, there must be a label containing, at least, the following
information:
This device contains
FCC ID: XPYNORAW3
IC: 8595A-NORAW3
“XPY”
represents the FCC
“
Grantee Code
”
for u-blox AG, this code may consist of Arabic numerals,
capital letters, or other characters, the format for this code will be specified by the Commission
’
s
Office of Engineering and Technology
7
.
“8595A”
is the Company Number for u-blox AG registered at
ISED.
“NORAW3”
is the Unique Product Number decided by the grant owner.
The label must be affixed to an exterior surface of the end product such that it will be visible upon
inspection in compliance with the modular labeling requirements of OET KDB 784748. The host user
manual must also contain clear instructions on how end users can find and/or access the FCC ID of
the end product.
FCC end product labeling
In accordance with 47 CFR § 15.19, the end product shall bear the following statement in a
conspicuous location on the device:
6
47 CFR §15.202
7
47 CFR 2.926
