EVK-MAYA-W1 - User guide
UBX-21039658 - R01
Board description
Page 15 of 22
Figure 9: M.2 card ZIF connector (J2) and pin headers J4/5
The M.2 Key E pinout follows the definition from NXP for M.2 sockets on platforms based on NXP
MPUs and MCUs. For more information about the Wi-Fi/Bluetooth M.2 Key E Pinout Definition on NXP
host boards, see also the NXP AN13049 pin definition [6].
☞
Some interfaces might not be available on the M.2 socket of a host platform. Check the
interface connector specification from the host platform vendor to confirm the pinout and
supported interfaces.
3.5.3
Bluetooth host interface
MAYA-W1 series provides a UART host interface for Bluetooth communication. The UART interface
can be either accessed directly through pin header J4, or connected to the M.2 card connector J2
using jumpers. The EVB includes a USB-to-UART bridge (FT234XD) for accessing the UART interface
through USB. Access is provided through the USB type-C connector J1 or the USB lines on the M.2
card interface. The USB type-C connector can be used for the EVB power supply.
