C101-D9C - User guide
UBX-21009111 - R02
C101-D9C operation with C099-F9P
Page 10 of 17
C1-Public
4.1
C101-D9C/C099-F9P via Arduino shield
Figure 9 shows the placement of the Arduino connectors on the C101-D9C board and Figure 10 shows
how to physically connect the C099-F9P board to the C101-D9C board via the Arduino shield. Jumper
J18 on the C099 board is needed for the ZED-F9P to receive the correction data on UART1 port. See
the C099 application board User guide [5] for further details.
Figure 9: C101-D9C Arduino connectors
Figure 10: Connecting C101-D9C to C099-F9P
