AMY-6M - Data Sheet
UBX-13004381 - R07
Production Information
Electrical specifications
Page 14 of 28
3
Electrical specifications
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress
above one or more of the limiting values may cause permanent damage to the device. These are stress
ratings only and operation of the device at these or at any other conditions above those given in the
Characteristics sections of the specification is not implied. Exposure to limiting values for extended
periods may affect device reliability.
Where application information is given, it is advisory only and does not form part of the specification.
3.1
Absolute maximum ratings
Symbol
Parameter
Condition
Min.
Max.
Unit
VDD_Cx,
VDD_B,
VDD_PLL
Supply Voltage digital cores (outputs)
-0.5
1.6
V
VDD_IOx
Supply Voltage I/O ring
-0.5
3.6
V
VDD_USB
Supply Voltage USB
-0.5
3.6
V
VDD_RF
Supply Voltage RF Front-end
-0.5
3.6
V
Ipin
DC Current through any digital I/O pin (except supplies)
10
mA
I_TCXO
DC Current through pin TCXO_POWER
2.5
mA
Vi
Input Voltage on any pin not belonging to digital I/O with
respect to ground
-0.5
VDD
11
+0.
5
V
Vi
DIG
12
Input Voltage on digital I/O pin with respect to ground
-0.5
3.6
V
V_DCDC
Supply Voltage Baseband main core LDO input
-0.5
3.6
V
V_RUN
V_BCKP
V_RESET
V_TH
Supply Voltage Baseband backup core LDO inputs
Supply Voltage Baseband backup core LDO inputs
Input Voltage Reset Monitor
Input Voltage Reset Threshold level
-0.5
3.6
V
VDD_3V
Input Voltage RF LDO
-0.5
3.6
V
Prfin
RF Input Power on LNA_IN, MIX_IN_P, MIX_IN_N
15
dBm
Ptot
Total Power Dissipation
500
mW
Tjun
Junction Temperature
-40
+105
°C
Ts
Storage Temperature
-40
+125
°C
Table 8: Absolute maximum ratings
GPS receivers are Electrostatic Sensitive Devices (ESD) and require special precautions when
handling. For more information see the
AMY-6M Hardware Integration Manual
[1].
Stressing the device beyond the “Absolute Maximum Ratings” may cause permanent damage.
These are stress ratings only. The product is not protected against overvoltage or reversed
voltages. If necessary, voltage spikes exceeding the power supply voltage specification, given
in table above, must be limited to values within the specified boundaries by using appropriate
protection diodes.
11
VDD is the voltage of the power domain connected to the pin.
12
Includes the following pins: DCDC_EN, SLEEP_N, PIO0..PIO24, TCK, TDI, TDO, TMS, EM_D0..EM_D15, EM_A1..EM_A17, CS2_N, OE_N,
WE_N.
