BVS-ZWx User Manual
Date:02-APR-2020
Ubitech Ltd.
Version: 0.9.4
Page: 17
7
PHYSICAL INSTALLATION
7.1
Quick Installation Instruction:
-
Make sure to disconnected the power.
-
Place the Valve Handle in Close position.
-
Choose right size Fork of BVS and aligning with Valve Handle. *Refer to “Figure A”
-
Make sure the Knob and Valve Handle are facing on same side. *Refer to “Figure B”
-
Tighten Clamps while holding down the Custos BVS.
-
Unplug the Dust Cover and plug Local Water Sensor Probe into connector tightly. (Optional) *Refer to Figure C
-
Connect the power socket to DC Adaptor, screw up the water seal cover.
-
Plug DC Adaptor into AC Power Outlet.
Figure A
Figure B
Leak Sensor
Connector
Local Water
Sensor Probe
Dust Cover
Figure C
Power socket
