manualshive.com logo in svg

Ubisys 7047, Reference Manual

Share
Download
Ubisys 7047 Reference Manual Download Page 11

11

 

 

www.ubisys.de

 

Response 

OK 

5.2.6.

 

Buzzer Control 

This command controls the operating mode of the on-board buzzer. Notice that not all hardware 
variants feature a buzzer. Requires CDC/ACM firmware version 1.13 or above. 

Syntax 

Request 

AT+B=[0|1]

   

 

Changes the operating mode of the buzzer 

 

 

 

 

 

to 0 = off, or 1 = on. If no operating  

 

 

 

 

 

mode is specified, the application  

 

 

 

 

 

relinquishes control to the firmware (a 

 

 

 

 

 

short beep whenever a transponder is 

 

 

 

 

 

detected). 

 

Response 

OK 

Example 

Request 

AT+B=1

 

 

 

Turns buzzer on. 

Response 

OK 

 

Request 

AT+B=0

 

 

 

Turns buzzer off. 

Response 

OK 

 

Request 

AT+B=

 

 

 

Returns control of the buzzer to the  

 

 

 

 

 

firmware.

 

Response 

OK 

5.2.7.

 

Inventory Scan 

Requests an inventory scan. Returns a list of 64-bit unique identifiers and the received signal strength 
indicators, as reported by main and auxiliary receivers. If no tags were found, the response is OK (no 
UIDs). 

ISO 15693 command: 01h (mandatory, supported by all tags) 

Summary of Contents for 7047























































Reviews:

No comments

Brands by name

Popular brands

Load more brands