background image

USW-16-POE

Certi cations

CE, FCC, IC

PoE

PoE Interfaces

Ports 1-8

POE+ IEEE 802.3af/at

(pins 1, 2+; 3, 6-)

Max. PoE Wattage per Port by PSE

802.3at

32W

Voltage Range 802.3af Mode

44-57V

Voltage Range 802.3at Mode

50-57V

Safety Notices

1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories speci ed by the manufacturer.

WARNING:

 Failure to provide proper ventilation may cause  re hazard. Keep at least 20 mm of

clearance next to the ventilation holes for adequate air ow.

WARNING:

 To reduce the risk of  re or electric shock, do not expose this product to rain or

moisture.

WARNING:

 Do not use this product in location that can be submerged by water.

WARNING:

 Avoid using this product during an electrical storm. There may be a remote risk of

electric shock from lightning.

Electrical Safety Information

1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the

manufacturer’s label. Connection to a different power source than those speci ed may result in

improper operation, damage to the equipment or pose a  re hazard if the limitations are not followed.

2. There are no operator serviceable parts inside this equipment. Service should be provided only by a

quali ed service technician.

3. This equipment is provided with a detachable power cord which has an integral safety ground wire

intended for connection to a grounded safety outlet.

a. Do not substitute the power cord with one that is not the provided approved type. Never use an

adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the grounding wire.

b. The equipment requires the use of the ground wire as a part of the safety certi cation, modi cation

or misuse can provide a shock hazard that can result in serious injury or death.

c. Contact a quali ed electrician or the manufacturer if there are questions about the installation prior

to connecting the equipment.

d. Protective earthing is provided by Listed AC adapter. Building installation shall provide appropriate

short-circuit backup protection.

USW-16-POE Quick Start Guide

Summary of Contents for UniFi USW-16-POE














Reviews: