Ubiquiti UniFi Cloud Key Gen2 Plus, Quick Start Manual

Page: 28 / 34

HDD Replacement
Note: The Cloud Key G2 Plus only supports hard drives that can operate
on 5V power. Hard drives that require additional power are not supported.
The Cloud Key Gen2 Plus comes pre­installed with a 1TB SATA HDD. If you want
to replace it, you must use a 2.5" SATA HDD and follow these instructions:
1. Back up your controller configurations. Controller configurations are stored on
the hard drive and will be reset when a new hard drive is inserted.
2. Power off the Cloud Key Gen 2 Plus to prevent any software disruption.
3.
WARNING: Do not release or operate the HDD Latch while the Cloud
Key Gen2 Plus is in use or powered on.