Introduction
Thank you for purchasing the Ubiquiti Networks®
UniFi® Quad‑Radio 802.11ac Wave 2 Access Point with
Dedicated Security and Beamforming Antenna. This Quick
Start Guide is designed to guide you through installation and
includes warranty terms.
IMPORTANT:
The UAP‑StadiumXG requires the UniFi
Controller v5.7 or higher, available at:
www.ubnt.com/download/unifi
Package Contents
UniFi Stadium XG AP
Adjustment Bracket
Pole Clamp
Carriage Bolts
(Qty. 4)
Flange Nuts
(Qty. 4)
Quad-Radio 802.11ac
Wave 2 Access Point with
Dedicated Security and
Beamforming Antenna
Model: UAP-StadiumXG
Lag Screws
(Qty. 4)
Gigabit PoE
(50V, 1.2A)
Power Cord
Quick Start
Guide
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet
cable and earth grounding must be used as conditions of product warranty. TOUGHCable
™
is
designed for outdoor installations. It is the professional installer’s responsibility to follow local
country regulations, including operation within legal frequency channels, output power, and
Dynamic Frequency Selection (DFS) requirements.
